PAG Hot-Shoe Power Base D-Tap (500mm)
Low-profile, hot-shoe Power Base for 12V Standard Paglight
2-pin D-Tap type connector for use with the light output on a battery mount
Lead length 500mm
Once fitted to the camera it enables the Paglight to be quickly connected or removed, leaving the Power Base and associated wiring in place.
The Paglight is removed by depressing the release catch and sliding the light backwards.
A 1/4" stud or camera shoe plate should be used to fit the Power Base directly to the camera.
The Power Base incorporates a swivelling facility with a captive locking mechanism. Always tighten the locking wheel firmly; this will secure the base while maintaining the swivel capability.
Features a D-Tap type 2-pin connector and a lead length of 500mm, suitable for use with the light output on a battery mount fitted to the rear of the camera.